Strenx 700 vs S690QL vs Q690: Equivalents, Specs and Price

Jay Zheng

Jay Zheng

Nov 20, 2026

Strenx 700 vs S690QL vs Q690: Equivalents, Specs and Price

Strenx 700 vs S690QL vs Q690: the 690-700 MPa class

When designing with high-strength steel, the 690-700 MPa class is the sweet spot between weight and cost: crane booms, trailer chassis, buckets and mining equipment structures. Three names compete in this class: Strenx 700 (SSAB's brand, Sweden), S690QL (European standard EN 10025-6) and Q690D/E (Chinese standard GB/T 1591). This article explains them with real equivalents and prices.

Equivalence table

SystemDesignationProcessGuaranteed impact
SSABStrenx 700 (formerly Weldox 700)QTper SSAB datasheet
EN 10025-6S690QLQT30 J at -40 °C
BaosteelBS700MC K2/K4TMCPK2: -20 °C · K4: -40 °C
GB/T 1591Q690D / Q690EQT/TMCPD: -20 °C · E: -40 °C

QT vs TMCP: the difference that matters

S690QL and Q690 are delivered quenched and tempered: heated, hardened and tempered for uniform strength across the plate, with good weldability and low-temperature toughness. Baosteel's equivalent, BS700MC K2/K4, is delivered thermo-mechanically rolled (TMCP) instead: the same strength class with excellent cold-formability — choose BS700MC K2/K4 for folded parts and S690QL/QL for demanding welded structures.

FOB Shanghai prices (indicative)

GradeFOB Shanghai priceProduct page
S690QL840-860 USD/MTview specs
Q690D/E790-1190 USD/MTview specs
BS 960 D/E1150-1260 USD/MTview specs

Which one to choose?

  • S690QL or BS700MC K4 when the specification demands EN 10025-6 traceability or service at -40 °C.
  • Q690E when you want the same nominal strength at the best price with documented Chinese standard.
  • BS700MC K2/K4 when the part is folded or cold-formed.

Baohui Steel, a first-tier Baosteel distributor, supplies all grades with original mill test certificates. See the high-strength steel category with full equivalence tables from 600 to 1300 MPa, or request a firm quotation.

Frequently Asked Questions

Is Strenx 700 the same as S690QL?

They are the same strength class: Strenx 700 is SSAB's brand for 700 MPa yield plate; S690QL is the European EN 10025-6 designation (≥690 MPa guaranteed, impact at -40 °C). Strenx 700's predecessor was Weldox 700, and Baosteel's equivalent is BS700MC K2/K4. In practice they are interchangeable by specification.

What is the difference between S690QL and Q690D/E?

Both sit in the 690 MPa class but follow different standards: S690QL is EN 10025-6 with guaranteed impact at -40 °C (QL) in quenched-and-tempered delivery; Q690D/E is Chinese GB/T 1591, with impact at -20 °C (D) or -40 °C (E). For demanding welded structures choose S690QL or BS700MC K4; Q690E is the lower-cost option with the same nominal strength.

How much does S690QL cost FOB Shanghai?

Indicatively 840-860 USD/MT FOB Shanghai depending on thickness and volume, well below Strenx 700 at the same port. Request a firm quotation with your specification.