BS 900 D - wear resistant steel plate from Baosteel

BS 900 D

BS900D ultra high strength structural steel: Thickness per agreement (thin gauges from 1.5 mm available), Width 900-2000 mm, delivered quenched and tempered with Baosteel MTC

Price Quote

Shipping from the Port of Shanghai

Whatsapp: +8619117008946

E-mail: sales@baohuisteel.com

Get a price →

BS900D Ultra High Strength Structural Steel Plate

BS900D is a quenched-and-tempered ultra high strength structural steel from Baosteel, designed for welded load-bearing structures that must carry maximum loads at minimum weight. It guarantees a yield strength of 900 MPa combined with 12% elongation and verified low-temperature toughness — a balance that makes it the natural choice between BS800E and BS960E in the Baosteel high-strength program.

In strength class it sits alongside EN 10025-6 S890QL and SSAB Strenx 900, and it is specified with Baosteel's series-level flatness control of ≤3 mm/m, which reduces straightening work before welding and assembly.

Mechanical Properties of BS900D

GradeYield Strength MPaTensile Strength MPaElongation %Impact KV2 JTest Temp.
BS900D≥900≥950≥12≥27-20 ℃
BS900Tuf (sibling grade)≥900≥950—≥60-40 ℃

Chemical composition is controlled to the Baosteel Q/BQB specification; every plate ships with the full heat analysis on the original Baosteel mill test certificate.

Need -40 ℃ Toughness? Choose BS900Tuf

For structures operating in arctic or high-altitude conditions, the sibling grade BS900Tuf guarantees ≥60 J Charpy V impact at -40 ℃ at the same 900 MPa yield level. Tell us your service temperature and we will recommend the right variant.

Welding BS900D — Matching Consumables

Baosteel validates its BS series with matching filler metals: BH900-II wire for the 900 MPa class (and BH1000-II for BS960/BS1100 joints), with documented all-weld-metal joint strengths in the 962–1032 MPa range. Preheat and interpass guidance follows the Baosteel official welding manual. See our Baosteel welding guide with real joint data for the full preheat and filler table.

Applications

BS900D is used where every kilogram matters: crane booms and outriggers, mining machinery frames, concrete pump booms, heavy trailer and dump-truck structural parts, and high-strength welded beams. For dump-truck lightweighting, Baosteel pairs the BS/BST structural grades with NM400E/NM450E/NM500E-class wear plate for the box — a combination documented at 20–40% total weight reduction. See the BST X-series page for the structural steel side of that solution.

Thin-Gauge Program

Baosteel's world-first compact heat-treatment line produces quenched-and-tempered plate down to 2.0 mm (extendable to 1.5 mm) in widths up to 1700 mm, with shot-blasted, corrosion-protected surface and delivery in 2–5 days. If your design needs thin, flat, ultra-high-strength plate, ask us about the thin-gauge program.

Fabrication and Delivery Conditions

Delivery condition: quenched and tempered (Q+T). Thickness, width and length ranges, Z-quality and additional tests are arranged per technical agreement. Every plate ships with its original Baosteel mill test certificate.

Contact us for a quotation with your drawings and annual volume.

Further Reading

Types of steel we supply with high-quality

Frequently asked